3M Scotchkote3M Epoxy Coating 162PWX (防腐塗層162PWX)
Product Description
Scotchkote Epoxy Coating 162PWX has been specifically
developed as a 100% solids lining for the internals of pipes,
tanks, vessels and other equipment in contact with potable
water.
Product Features
Scotchkote Epoxy Coating 162PWX combines good
application characteristics with excellent corrosion protection
and chemical resistance.
Scotchkote Epoxy Coating 162PWX is designed for application
in a single high build coat by plural feed hot airless spray and
has international approvals for contact with potable water.
To comply with the conditions of approval under Regulation
31(4)(a), this product must be applied in accordance with the
approved Instuctions For Use Document available from the
Northallerton Technical Centre on request.
Scotchkote Epoxy Coating 162PWX is suitable for use on steel
surfaces and cement mortar lined pipes.
·
Adhesion—Excellent to both blast cleaned and
mechanically scraped surfaces.
· Corrosion Resistance—Excellent even under
aggressive immersion conditions.
· Temperature Resistance—Suitable for use up to 60°C
in immersion service conditions dependent on chemicals
involved and up to 120°C in dry service conditions.
General Application Steps
1. Remove oil, grease and loosely adhering deposits.
2. Abrasive blast clean steel surfaces to NACE No. 2/SSPC-
SP10 near white metal, ISO 8501:1, Grade SA2½.
3. Apply Scotchkote Epoxy Coating 162PWX at the specified
thickness.
4. Allow to cure.
5. Visually or electrically inspect the coating for defects.
6. Repair all defects.英國3M公司出品產品由我公司原裝進口，詳細技術數據、安全性參數和使用說明請向我公司技術部咨詢索取
